🎉 Up to 70% Off Selected ItemsShop Sale
CO2 Regulator Nut Wrench - 1-1/8" Hex Offset Closed End
HomeStore

CO2 Regulator Nut Wrench - 1-1/8" Hex Offset Closed End

CO2 Regulator Nut Wrench - 1-1/8" Hex Offset Closed End

The CO2 Nut Wrench is an essential tool for every draught technician and kegerator owner. This 1-1/8" hex wrench is specifically designed to fit the standard gas nut on CO2 regulators. The offset, closed-end design provides the perfect angle and leverage to tighten and loosen regulator nuts in tight spaces, such as inside kegerators or behind gas cylinders. Constructed from heavy-duty steel to prevent rounding of the nut corners during repeated use.

Technician's Note: Never over-tighten your regulator nut. Hand-tighten onto the cylinder first, then use this wrench for a final 1/4 to 1/2 turn. Over-torquing can damage the nylon or fiber washer, causing a permanent gas leak. Keep this wrench tethered to your gas cylinder for easy access during tank swaps.
$1.40

Original: $3.99

-65%
CO2 Regulator Nut Wrench - 1-1/8" Hex Offset Closed End—

$3.99

$1.40

CO2 Regulator Nut Wrench - 1-1/8" Hex Offset Closed End

The CO2 Nut Wrench is an essential tool for every draught technician and kegerator owner. This 1-1/8" hex wrench is specifically designed to fit the standard gas nut on CO2 regulators. The offset, closed-end design provides the perfect angle and leverage to tighten and loosen regulator nuts in tight spaces, such as inside kegerators or behind gas cylinders. Constructed from heavy-duty steel to prevent rounding of the nut corners during repeated use.

Technician's Note: Never over-tighten your regulator nut. Hand-tighten onto the cylinder first, then use this wrench for a final 1/4 to 1/2 turn. Over-torquing can damage the nylon or fiber washer, causing a permanent gas leak. Keep this wrench tethered to your gas cylinder for easy access during tank swaps.

Product Information

Shipping & Returns

Description

The CO2 Nut Wrench is an essential tool for every draught technician and kegerator owner. This 1-1/8" hex wrench is specifically designed to fit the standard gas nut on CO2 regulators. The offset, closed-end design provides the perfect angle and leverage to tighten and loosen regulator nuts in tight spaces, such as inside kegerators or behind gas cylinders. Constructed from heavy-duty steel to prevent rounding of the nut corners during repeated use.

Technician's Note: Never over-tighten your regulator nut. Hand-tighten onto the cylinder first, then use this wrench for a final 1/4 to 1/2 turn. Over-torquing can damage the nylon or fiber washer, causing a permanent gas leak. Keep this wrench tethered to your gas cylinder for easy access during tank swaps.