🎉 Up to 70% Off Selected ItemsShop Sale
Winco TMT-P1 Diameter 1 Inch Pocket Thermometer with Clip and Case
HomeStore

Winco TMT-P1 Diameter 1 Inch Pocket Thermometer with Clip and Case

Winco TMT-P1 Diameter 1 Inch Pocket Thermometer with Clip and Case

  • 1 diameter dial face
  • 5 probe
  • Includes protective sleeve with built-in clip
  • Recalibrates for accuracy
Calibration Instructions:Calibration on this unit should done with a cold bath at 32F(0C) for a more accurate calibration.
  1. Fill cup with ice and top off with cold water and stir for 30 seconds.
  2. Insert probe into cup at least 1" deep for 15 seconds or until the temperature reading stabilizes. Keep the probe from touching the sides or bottom of the glass.NOTE: If the thermometer settles at 32F(0C), there is no calibration needed.
  3. Use pliers and adjust the calibration nut on the bottom of the dial and turn until it reads the proper temperature, 32F(0C).
$1.18

Original: $3.37

-65%
Winco TMT-P1 Diameter 1 Inch Pocket Thermometer with Clip and Case—

$3.37

$1.18

More Images

Winco TMT-P1 Diameter 1 Inch Pocket Thermometer with Clip and Case - Image 2

Winco TMT-P1 Diameter 1 Inch Pocket Thermometer with Clip and Case

  • 1 diameter dial face
  • 5 probe
  • Includes protective sleeve with built-in clip
  • Recalibrates for accuracy
Calibration Instructions:Calibration on this unit should done with a cold bath at 32F(0C) for a more accurate calibration.
  1. Fill cup with ice and top off with cold water and stir for 30 seconds.
  2. Insert probe into cup at least 1" deep for 15 seconds or until the temperature reading stabilizes. Keep the probe from touching the sides or bottom of the glass.NOTE: If the thermometer settles at 32F(0C), there is no calibration needed.
  3. Use pliers and adjust the calibration nut on the bottom of the dial and turn until it reads the proper temperature, 32F(0C).

Product Information

Shipping & Returns

Description

  • 1 diameter dial face
  • 5 probe
  • Includes protective sleeve with built-in clip
  • Recalibrates for accuracy
Calibration Instructions:Calibration on this unit should done with a cold bath at 32F(0C) for a more accurate calibration.
  1. Fill cup with ice and top off with cold water and stir for 30 seconds.
  2. Insert probe into cup at least 1" deep for 15 seconds or until the temperature reading stabilizes. Keep the probe from touching the sides or bottom of the glass.NOTE: If the thermometer settles at 32F(0C), there is no calibration needed.
  3. Use pliers and adjust the calibration nut on the bottom of the dial and turn until it reads the proper temperature, 32F(0C).